Caring for Your Wood Building
Questions? Ask our Buyer's Guide, or call or text (888) 474-9876.
Solid wood is one of the lowest-maintenance materials there is — but it's a natural one, so it asks for two simple things: a protective finish, and a few minutes of attention each year. Do that, and it lasts for decades.
First: Finish It (Ideally Within 24–48 Hours)
The timber ships unfinished, so protect it soon after assembly — we recommend within 24–48 hours — with two coats of exterior paint or three of stain, covering every surface including the door and window frames and the roof edges. This is what keeps water out and the wood stable — and damage from leaving the wood unfinished isn't covered by your warranty. Use a breathable exterior wood finish; don't seal the timber airtight.

Paint or stain, what suits your climate, and how to apply it step by step: See our Paint & Stain Guide →
Paint or Stain?
Both protect the wood — pick the look you want. A semi-transparent stain soaks in and lets the grain show, and you re-coat it without scraping. Paint forms a solid film in any color and lasts well, but when it wears it needs scraping and sanding before you repaint. Either way, use a breathable exterior product made for wood, choose one with a mildewcide in humid climates, and seal every cut board end.
The First Year: Expect It to Settle
Solid-wood walls move. Over the first 12–18 months the boards dry and settle, and after that they expand and shrink a little with the seasons — this is completely normal, not a fault. Just keep the expansion gaps above the doors, windows and fittings (the ones shown in your manual) clear, and re-check screws and hinges after the first season. Never fix anything rigidly across the wall boards.
Every Spring — About Fifteen Minutes
- Clear the roof covering and any gutters of leaves and debris.
- Check the hinges, handles and locks: a drop of light oil keeps the hinges smooth, and a little graphite powder keeps the lock working (oil in a lock collects dust).
- Make sure the airflow under the building isn't blocked.
- Keep soil, mulch and plants back from the base so nothing traps moisture against the wood, and aim lawn sprinklers away from the walls.
- Tap any shifted board back home with a rubber mallet.
- Look over the finish and touch up any bare or worn spots.
In Winter. After heavy snow, clear low-slope roofs from the ground with a roof rake — never climb onto a snowy roof — and keep drifts from piling up against the walls. Check the storm braces and anchors at the start of each winter and adjust them as your manual shows.
Every 3–5 Years
Re-coat the exterior — one afternoon, one ladder. Bare, dull or graying patches are your cue that it's time.
Humid Climates
Good airflow underneath plus a finish you keep up are your best defense against mold and mildew. Don't let dense planting trap damp air against the walls, and make sure water drains away from the base.
Normal, Not a Defect
Small surface cracks (checking), knots, slight color variation, the occasional sap bleed, and minor seasonal movement are all natural characteristics of real solid wood — not faults. They don't affect how the building performs. Condensation on the inside of the windows in cold weather is normal too — open the door or a window for a few minutes to let the damp air out.

Inside the Building
The interior can stay natural. If you'd like it easier to wipe clean and slower to yellow, use a clear, water-based interior wood finish — breathable, never an airtight sealant. Let grills and patio torches cool completely before you store them inside.
Rot & Termites
Keep the timber finished, lifted off the ground on its foundation, with airflow underneath and soil back from the base, and the wood stays sound. Your foundation beams and floor joists are pressure-treated; in active termite regions, see our Termite & Wood Protection Guide for a simple borate treatment you add once the building is up, before you paint or stain. Once or twice a year, walk around the base and look for the warning signs listed in that guide.
Stuck on your project?
Ask our Buyer's Guide, or call or text us — real people who know every model, happy to talk you through any step.