Paint & Stain Guide — Finishing Your Solid-Wood Building
Questions? Ask our Buyer's Guide, or call or text (888) 474-9876.
Your ohubo arrives as bare, kiln-dried wood, ready for the finish you choose. Finishing it is a simple job — a brush, a ladder and a couple of dry days — and it's the best thing you can do for the wood: it keeps out water and sun, keeps the boards stable — and damage from leaving the wood unfinished isn't covered by your 3-Year Limited Warranty. Here's how to choose, apply and keep it up.

The Short Version
Choose
Love the wood grain? A semi-transparent exterior stain. Want a color? A quality exterior acrylic paint. Your climate can tip it — see below.
Apply within 24–48 hours (recommended)
On clean, dry wood: two coats of paint or three of stain, on every outside surface, board ends included.
Keep it up
A gentle rinse and a look-over every spring, and a fresh coat when the color looks tired — usually every 3–5 years.
Why Finishing Matters
Bare wood left outdoors turns silver-gray in the sun within months, and water soaks in fastest through the board ends and knots. A good finish slows both: the pigment blocks the sun, and the coating sheds water, so the boards stay stable instead of swelling and shrinking with every shower. That's why we recommend it within 24–48 hours of assembly — and why damage from leaving the wood unfinished isn't covered by the warranty.
Paint or Stain? How They Differ
The difference is where the finish sits. Paint forms a film on top of the wood; a penetrating stain soaks into it. That one difference decides how it looks, how it wears, and how much work the next coat will be.
| Paint | Solid-color stain | Semi-transparent stain | |
|---|---|---|---|
| Look | Any color; hides the grain | Color, with the wood texture showing through | Tints the wood; the grain and knots show |
| How it wears | Lasts longest, then cracks or peels | In between | Fades gradually; doesn't peel |
| The next coat | Scrape and sand loose paint, spot-prime, repaint | Clean, then recoat | Clean, then recoat — no scraping |
| Best for | A crisp color and the longest time between jobs | Color with a softer, woody look | The natural look and the easiest upkeep |
Whichever you choose, use a breathable exterior product made for wood — never an airtight sealer — and one with a mildewcide if you live somewhere humid.

What Suits Your Climate
Any good finish works anywhere if you keep it up — but your weather decides which one lasts longest with the least work.
| Climate | Where | Our pick | Why |
|---|---|---|---|
| Hot and humid | Southeast, Gulf Coast | Semi-transparent stain with a mildewcide | It breathes, so moisture can't get trapped under a film and blister it |
| Dry and sunny | Southwest, inland California | Pigmented stain in a light-to-mid color | Strong sun breaks films down, and pigment is what blocks UV. Skip clear finishes and very dark colors |
| High altitude | Mountain West | Pigmented stain | Intense sun and big day-to-night swings are hard on films; expect the sunniest wall to need a coat first |
| Long, cold winters | Upper Midwest, northern New England | 100% acrylic paint or a penetrating stain | Both stay flexible through freeze and thaw (budget vinyl-acrylic paints don't — they turn brittle and crack); plan the job for a warm, dry spell |
| Wet and mild | Pacific Northwest | Penetrating stain | Months of damp are hardest on paint; stain sheds water without trapping it. Apply in a dry summer stretch |
| Four seasons | Northeast, Mid-Atlantic, lower Midwest | Paint or stain — your choice | The gentlest climate for finishes, where a quality 100% acrylic paint lasts longest |
Air-quality rules: in some areas — Southern California among them — only low-VOC stains and paints can be sold. Buy locally and your store will stock what's allowed; check the label says it's for exterior wood.
Choosing Colors
Light and mid colors fade less and keep the walls cooler in strong sun; very dark colors look striking, but they heat up more — which makes the wood move more — and show fading sooner. For a finished look, pick up to three: one for the walls, one for the door and window frames and, if you like, an accent for the roof edges — or keep it simple with one color all over. Try your color on an offcut first: wood takes color a little differently from the chip on the card.



Before You Start
- Timing: we recommend within 24–48 hours of assembly — so plan the build for a dry spell: no rain forecast for a day or two, and temperatures inside the range on the can (usually above 50°F). Avoid direct midday sun, which dries the finish too fast.
- Dry wood: after rain, give the wood two or three dry days. Never finish damp wood.
- Clean: brush or rinse off dust and pollen, and let it dry.
- The water test: sprinkle a little water on a wall. If it soaks in, the wood is ready. If it beads up, give the surface a light sanding with 80-grit paper so the finish soaks in evenly.
- Knots under paint: spot-prime the knots with a stain-blocking primer so they don't show through.
- Using a borate treatment? It goes on the bare wood first, once the building is up — see our Termite & Wood Protection Guide — and your finish then seals it in.
- Protect what shouldn't be painted: glass, the door and window seals, hinges and locks — mask them or keep a steady hand.
How to Apply It
- Board ends first. The cut ends at the corners and around the openings soak up water fastest — give them a generous coat before anything else.
- Top to bottom, a few boards at a time. Brush along the grain and carry each stroke to a corner or a joint, so you don't get lap marks.
- Into the joints. Work the finish into the grooves between the wall boards and around the edges of the door and window frames. Once the frames are finished and dry, run a thin bead of clear exterior silicone where the glass meets the wood, so rain can't seep in behind the glazing.
- Don't forget the edges: the roof edges, the underside of the overhangs, and the bottom wall boards — the ones closest to the ground.
- Let it dry, then recoat. Follow the drying time on the can — hours for water-based products, a day or more for oil-based ones — then add your second coat of paint, or the second and third coats of stain.
- Leave the joints free to move. Never caulk or glue the joints between the wall boards, or the gaps above the doors and windows — the walls need them to settle.

Tools: a 3–4 in brush for the walls, a 1½–2 in angled brush for the frames, a stepladder, drop cloths, painter's tape, a bucket and a garden hose. A small roller speeds up wide walls, but always brush the finish in afterward. How much? Check the coverage on the can — rough or thirsty wood takes more — and buy it all from the same batch, with a little extra for touch-ups. Cleaning up: rags soaked in oil-based stain can catch fire on their own as they dry — lay them flat outdoors to dry, or seal them in a water-filled metal can, before you throw them away.
The Inside (Optional)
The interior doesn't need a finish — solid wood is lovely left natural. If you'd like it easier to wipe clean, use a clear, water-based interior wood finish: breathable, never an airtight sealant. Water-based products also keep the wood paler for longer, while oil-based clear coats warm it toward amber. On the floor, a hard-wearing water-based floor finish or a hardwax oil stands up to foot traffic.

Keeping It Looking Good
- Every spring: rinse the walls gently with a garden hose — never a pressure washer, which drives water into the joints and roughens the grain. Then look over the sunniest walls, the board ends and the bottom boards, and touch up any bare or worn spots.
- When to recoat: when the color looks tired or chalky, or water stops beading on the surface — for most finishes, every 3–5 years, stains a little sooner and paints a little later. The sun-facing walls usually go first.
- Stain: clean, let it dry and add a fresh coat — no scraping.
- Paint: when it starts to crack or flake, scrape and sand the loose areas, spot-prime any bare wood, and repaint.

What to Avoid
- Airtight sealers — and clear water sealers used on their own: they give little protection from the sun and wear off fast.
- Thick deck “resurfacer” coatings — they trap moisture and can peel off in sheets.
- Pressure washers.
- Caulk or foam in the wall joints and the gaps above the doors and windows — or siding, stucco or any other rigid cladding over the walls: solid wood moves with the seasons, so anything rigid cracks and traps water against it.
- Very dark colors on walls in full desert sun.
- Finishing damp wood, or working in direct midday sun.
Common Questions
- Do I have to finish it?
- Yes — we recommend finishing the outside within 24–48 hours of assembly. It protects the wood, and damage from leaving it unfinished isn't covered by your 3-Year Limited Warranty.
- Can I paint the boards before I build?
- We don't recommend it: loose boards left out can warp, and the finish gets scuffed during the build. Finish the building once it's up — the same goes for a borate treatment. The exceptions are the spots you can't reach later: seal any board you cut; over a gravel or paver base, coat the underside of the floorboards before you lay them; and if a wall will stand close to a fence or another wall, paint or stain its outer face every few rows as it goes up.
- Can I switch from stain to paint later?
- Yes — clean it, let it dry, prime and paint. Going back from paint to a natural stain means stripping the paint first, so choose paint knowing that.
- Will the wood change color?
- Outside, unfinished wood turns silver-gray in the sun; a pigmented finish prevents that. Inside, the wood slowly warms to a honey tone with age — a water-based clear finish keeps it paler for longer.
- Does the roof need painting?
- The roof boards sit under your roof covering, so no — but finish the roof edges and the underside of the overhangs along with the walls.
- What about a veranda or deck floor?
- Decking takes foot traffic and standing water, so use a deck stain made for floors rather than your wall finish, and renew it more often.
Stuck on your project?
Ask our Buyer's Guide, or call or text us — real people who know every model, happy to talk you through any step.